IP & Networking

CIDR Aggregator for IPv4 and IPv6

Paste a list of networks. Duplicates, overlaps and adjacent blocks are merged into the smallest list that covers exactly the same addresses.

Aggregate networks

One network per line, or separated by commas or spaces. A single address counts as a /32 or /128. Lines starting with # are ignored. Processed in your browser.

How to use the CIDR aggregator

  1. Paste your networks, for example from a firewall address group, an allowlist or a cloud provider's published ranges.
  2. Select Aggregate. Invalid entries are listed with their line numbers and skipped.
  3. Copy or download the result. IPv4 networks are listed first, then IPv6.

What gets merged

  • Duplicates: the same network listed twice.
  • Overlaps: 10.0.0.0/24 already contains 10.0.0.128/25, so the /25 disappears.
  • Adjacent blocks: 10.0.0.0/24 and 10.0.1.0/24 become 10.0.0.0/23.

The result always covers exactly the same addresses as the input; nothing is added. That is why 10.0.1.0/24 and 10.0.2.0/24 stay as two entries: a single /23 would have to start at 10.0.0.0 or 10.0.2.0 and would include addresses you did not list.

Entries with host bits set

An entry such as 192.168.1.10/24 has bits set after the prefix. The tool treats it as the network it belongs to, 192.168.1.0/24, and lists it as a warning so you can check the source data.

IPv6 output

IPv6 networks are written in the RFC 5952 recommended form: lowercase, no leading zeros, and the longest run of zero groups shortened to ::. That makes output from different sources directly comparable.

Where this helps

  • Tidying firewall address objects and groups before a firewall rule review.
  • Shortening allowlists for SaaS or cloud services, where some products limit the number of entries.
  • Checking route summaries before configuring them.

Frequently asked questions

Does aggregation change which addresses are allowed?

No. The output covers exactly the same addresses as the input; it is just a shorter list.

Why are two adjacent /24 networks not merged?

Two blocks can only become one larger block if together they form an aligned power-of-two range. 10.0.1.0/24 and 10.0.2.0/24 are adjacent but not aligned, so merging them would add addresses.

Can I mix IPv4 and IPv6?

Yes. Each family is aggregated separately and IPv4 is listed first.