IP & Networking

Bandwidth and Transfer Time Calculator

Work out how long a transfer takes, how much bandwidth a deadline needs, and convert between bits, bytes, decimal and binary units.

Calculate

13 minutes, 20 seconds
Transfer time13 minutes, 20 seconds
In seconds800 s
Effective data rate100 Mbit/s
Overhead assumed0%

How to use the bandwidth calculator

  • Transfer time: enter the data size and the link speed to see how long the transfer takes.
  • Bandwidth needed: enter the data size and the time you have, such as an overnight backup window, to see the line rate required.
  • Unit converter: convert any data size or speed into every common unit at once.

Bits, bytes, decimal and binary units

Network speeds are quoted in bits per second, and file sizes in bytes; one byte is eight bits. A 100 Mbps connection therefore moves at most 12.5 megabytes per second before any overhead.

Prefixes come in two families. Decimal prefixes (k, M, G, T) are powers of 1,000 and are used for network speeds and by most storage manufacturers. Binary prefixes (Ki, Mi, Gi, Ti, defined by the IEC) are powers of 1,024, and are what many operating systems actually count, sometimes while still labelling them KB, MB and GB. That is why a "1 TB" disk shows as about 931 GiB.

Worked example

Moving 10 GB over a 100 Mbps link: 10 GB is 80,000,000,000 bits, and at 100,000,000 bits per second that takes 800 seconds, or 13 minutes 20 seconds, at the raw line rate. Allowing about 5.1% for TCP over Ethernet, it takes about 14 minutes 3 seconds.

About the overhead setting

Every packet carries headers as well as data. With TCP over Ethernet and 1,500-byte packets, each frame carries 1,460 bytes of data in 1,538 bytes on the wire, once the Ethernet header, checksum, preamble and the gap between frames are counted. That is the 5.1% option. VPN tunnels, VLAN tags and other encapsulations add more; use a custom percentage for those.

Why real transfers are often slower

  • Other traffic sharing the link, including other users and backups.
  • Latency: a single TCP connection over a long distance may not fill a fast link.
  • Wi-Fi, which rarely reaches the speed printed on the router.
  • Disk speed at either end, and firewall inspection of the traffic.

Frequently asked questions

How many MB/s is 100 Mbps?

12.5 MB/s at most, because there are eight bits in a byte. Expect a little less in practice once protocol overhead is counted.

What is the difference between MB and MiB?

A megabyte (MB) is 1,000,000 bytes; a mebibyte (MiB) is 1,048,576 bytes. Network speeds always use the decimal form.

How much bandwidth do I need for a nightly backup?

Use the Bandwidth needed tab: enter the backup size and the length of your backup window. Add headroom, because the link will rarely run at full speed for the whole window.